[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: LaCie USB 2.0 hard drive on OpenBSD 3.5
Here's the output of "disklabel sd0":
root# disklabel sd0
disklabel: warning, DOS partition table with no valid OpenBSD partition
# /dev/rsd0c:
type: SCSI
disk: SCSI disk
label: WD2500JB-00FUA0
flags:
bytes/sector: 512
sectors/track: 32
tracks/cylinder: 64
sectors/cylinder: 2048
cylinders: 238475
total sectors: 488397168
rpm: 3600
interleave: 1
trackskew: 0
cylinderskew: 0
headswitch: 0 # microseconds
track-to-track seek: 0 # microseconds
drivedata: 0
16 partitions:
# size offset fstype [fsize bsize cpg]
c: 488397168 0 unused 0 0 # (Cyl. 0 -
238475*)
i: 488392002 63 MSDOS # (Cyl. 0*-
238472*)
Marco Peereboom wrote:
> Send us a "disklabel sd0"
>
> On May 1, 2004, at 6:43 PM, Lawrence Teo wrote:
>
>> I ran into problems using a 250GB LaCie P3 USB 2.0 hard drive on an
>> OpenBSD 3.5 system, and I was wondering if someone knows the solution.
>>
>> The problem is that OpenBSD refuses to mount the filesystem on the hard
>> drive. The filesystem is formatted as FAT32 but OpenBSD does not want to
>> recognize it:
>>
>>
>> root# mount /dev/sd0i /mnt/usbdrive
>> mount_msdos: /dev/sd0i on /mnt/usbdrive: not an MSDOS filesystem
>>
>> root# mount -t msdos /dev/sd0i /mnt/usbdrive
>> mount_msdos: /dev/sd0i on /mnt/usbdrive: not an MSDOS filesystem
>>
>> root# mount -t msdos /dev/sd0c /mnt/usbdrive
>> mount_msdos: /dev/sd0c on /mnt/usbdrive: Inappropriate file type or
>> format
>>
>> root# mount -t msdos /dev/sd0a /mnt/usbdrive
>> mount_msdos: /dev/sd0a on /mnt/usbdrive: Device not configured
>>
>>
>> Here's my fdisk output:
>>
>>
>> -bash-2.05b# fdisk sd0
>> fdisk: sysctl(machdep.bios.diskinfo): Device not configured
>> Disk: sd0 geometry: 238475/64/32 [488397168 Sectors]
>> Offset: 0 Signature: 0xAA55
>> Starting Ending LBA Info:
>> #: id C H S - C H S [ start: size ]
>> ----------------------------------------------------------------------- -
>> *0: 0C 0 1 32 - 238472 44 1 [ 63: 488392002 ] Win95
>> FAT32L
>> 1: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>> 2: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>> 3: 00 0 0 0 - 0 0 0 [ 0: 0 ] unused
>>
>>
>> My dmesg is as follows (I inserted the USB hard drive after booting up):
>>
>>
>> OpenBSD 3.5 (GENERIC) #34: Mon Mar 29 12:24:55 MST 2004
>> deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
>> cpu0: Intel(R) Pentium(R) III Mobile CPU 1200MHz ("GenuineIntel"
>> 686-class) 1.20 GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
>> FXSR,SSE
>> real mem = 267931648 (261652K)
>> avail mem = 242102272 (236428K)
>> using 3296 buffers containing 13500416 bytes (13184K) of memory
>> mainbus0 (root)
>> bios0 at mainbus0: AT/286+(00) BIOS, date 11/26/01, BIOS32 rev. 0 @
>> 0xffe90
>> apm0 at bios0: Power Management spec V1.2
>> apm0: battery life expectancy 100%
>> apm0: AC on, battery charge high, charging, estimated 5:45 hours
>> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
>> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbc20/192 (10 entries)
>> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE"
>> rev 0x00)
>> pcibios0: PCI bus #4 is the last bus
>> bios0: ROM list: 0xc0000/0xd000 0xcd000/0x800! 0xcd800/0x800!
>> 0xce000/0x800! 0xce800/0x800! 0xcf000/0x800! 0xcf800/0x800!
>> 0xd0000/0x800 0xd0800/0x800! 0xd1000/0x800! 0xd1800/0x800
>> 0xd2000/0x800!extent_alloc_region: can't allocate region descriptor
>> :12 0xd2800/0x800!extent_alloc_region: can't allocate region descriptor
>> :12 0xd3000/0x800extent_alloc_region: can't allocate region descriptor
>> :12 0xd3800/0x800extent_alloc_region: can't allocate region descriptor
>> :12
>> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82815 Hub" rev 0x04
>> ppb0 at pci0 dev 1 function 0 "Intel 82815 AGP" rev 0x04
>> pci1 at ppb0 bus 1
>> vga1 at pci1 dev 0 function 0 "Nvidia GeForce2 Go" rev 0xb2
>> wsdisplay0 at vga1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x03
>> pci2 at ppb1 bus 2
>> esa0 at pci2 dev 3 function 0 "ESS Maestro 3" rev 0x10: irq 5
>> ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
>> ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
>> audio0 at esa0
>> xl0 at pci2 dev 6 function 0 "3Com 3c556 100Base-TX" rev 0x10: irq 10
>> address 00:04:76:49:81:72
>> ukphy0 at xl0 phy 0: Generic IEEE 802.3u media interface
>> ukphy0: OUI 0x00c000, model 0x0000, rev. 0
>> "3Com Mini-PCI V.90 Modem" rev 0x10 at pci2 dev 6 function 1 not
>> configured
>> cbb0 at pci2 dev 15 function 0 "Texas Instruments PCI4451 CardBus" rev
>> 0x00: irq 10
>> cbb1 at pci2 dev 15 function 1 "Texas Instruments PCI4451 CardBus" rev
>> 0x00: irq 10
>> "Texas Instruments PCI4451 FireWire" rev 0x00 at pci2 dev 15 function 2
>> not configured
>> cardslot0 at cbb0 slot 0 flags 0
>> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
>> pcmcia0 at cardslot0
>> cardslot1 at cbb1 slot 1 flags 0
>> cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
>> pcmcia1 at cardslot1
>> pcib0 at pci0 dev 31 function 0 "Intel 82801BAM LPC" rev 0x03
>> pciide0 at pci0 dev 31 function 1 "Intel 82801BAM IDE" rev 0x03: DMA,
>> channel 0 wired to compatibility, channel 1 wired to compatibility
>> wd0 at pciide0 channel 0 drive 0: <IC25N020ATDA04-0>
>> wd0: 16-sector PIO, LBA, 19077MB, 39070080 sectors
>> atapiscsi0 at pciide0 channel 0 drive 1
>> scsibus0 at atapiscsi0: 2 targets
>> cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 3.7C> SCSI0 5/cdrom
>> removable
>> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
>> cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
>> pciide0: channel 1 ignored (disabled)
>> uhci0 at pci0 dev 31 function 2 "Intel 82801BA USB" rev 0x03: irq 10
>> usb0 at uhci0: USB revision 1.0
>> uhub0 at usb0
>> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>> uhub0: 2 ports with 2 removable, self powered
>> isa0 at pcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pms0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> sysbeep0 at pcppi0
>> lpt0 at isa0 port 0x378/4 irq 7
>> npx0 at isa0 port 0xf0/16: using exception 16
>> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
>> biomask 4440 netmask 4440 ttymask 54c2
>> pctr: 686-class user-level performance counters enabled
>> mtrr: Pentium Pro MTRR support
>> dkcsum: wd0 matched BIOS disk 80
>> root on wd0a
>> rootdev=0x0 rrootdev=0x300 rawdev=0x302
>> umass0 at uhub0 port 1 configuration 1 interface 0
>> umass0: LaCie LaCie Hard Drive USB, rev 2.00/0.00, addr 2
>> umass0: using SCSI over Bulk-Only
>> scsibus1 at umass0: 2 targets
>> sd0 at scsibus1 targ 1 lun 0: <WDC, WD2500JB-00FUA0, 15.0> SCSI2
>> 0/direct fixed
>> sd0: 238475MB, 238475 cyl, 64 head, 32 sec, 512 bytes/sec, 488397168 sec
>> total
>>
>>
>> I would really appreciate any suggestions on how to solve this problem.
>>
>> Thanks,
>> Lawrence