Re: Install Problems with Adaptec AHA-2940 (DMESG incl.)

[Raymond Morsman <raymond@dyn.org>]

On Sat, 2004-05-01 at 03:30, Martin Holzhauer wrote:
> I have a Pentium 90 with a Adaptec AHA-2940 and tried 2 hours ago to
> install 3.5 stable.

I don't have the problems. Works fine for me. Here's my dmesg:

OpenBSD 3.5 (GENERIC) #1: Thu Apr  8 01:17:14 CEST 2004
    root@escher.openminds.nl:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 465 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 266711040 (260460K)
avail mem = 240971776 (235324K)
using 3281 buffers containing 13438976 bytes (13124K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 07/07/99, BIOS32 rev. 0 @
0xfdb70
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf3c40/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x7000 0xd0000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810-DC100" rev 0x02: rng active,
8Kb/secvga1 at pci0 dev 1 function 0 "Intel 82810-DC100 Graphics" rev
0x02: aperture at 0xf8000000, size 0x4000000
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 1 function 0 "Intel 82557" rev 0x08: irq 10, address
00:a0:c9:e2:fb:37
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
de0 at pci1 dev 9 function 0 "DEC 21041" rev 0x21: irq 9
de0: 21041 [10Mb/s] pass 2.1 address 00:00:c5:0e:6f:39
ahc1 at pci1 dev 11 function 0 "Adaptec AHA-2940U" rev 0x00: irq 10
scsibus0 at ahc1: 16 targets
sd0 at scsibus0 targ 8 lun 0: <IBM, IC35L018UWD210-0, S5BS> SCSI3
0/direct fixedsd0: 17501MB, 20765 cyl, 3 head, 575 sec, 512 bytes/sec,
35843670 sec total
sd1 at scsibus0 targ 10 lun 0: <IBM, DNES-309170W, SA30> SCSI3 0/direct
fixed
sd1: 8748MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sec, 17916240 sec
total
pcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82801AA SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask 400 netmask 600 ttymask 602
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ahc1: target 8 using 16bit transfers
ahc1: target 8 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd0 matched BIOS disk 80
ahc1: target 10 using 16bit transfers
ahc1: target 10 synchronous at 20.0MHz, offset = 0x8
dkcsum: sd1 matched BIOS disk 81
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02