[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

TV under 3.2-current

I'm trying to get an Aver Media TV card working under 3.2-current.  I've
tried both fxtv and xawtv, and when I run either, it displays the picture on
the screen (moving) and locks the keyboard and mouse solid (No ctrl-alt-bs.
no numlock.)  Any ideas?  Dmesg below.




OpenBSD 3.2-current (GENERIC) #97: Mon Jan 27 12:16:09 MST 2003
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 602 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,
SIMD
real mem  = 536440832 (523868K)
avail mem = 491806720 (480280K)
using 4278 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(92) BIOS, date 06/14/01, BIOS32 rev. 0 @ 0xf0690
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xf02
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf0e60/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:04:0 ("VIA VT82C586 PCI-ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xa000 0xcc000/0x4000! 0xd0000/0x800 0xd4000/0x4000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT82C691 Host-PCI" rev 0xc2
ppb0 at pci0 dev 1 function 0 "VIA VT82C598 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "3DFX Interactive Voodoo3" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0 "VIA VT82C596A PCI-ISA" rev 0x12
pciide0 at pci0 dev 4 function 1 "VIA VT82C571 IDE" rev 0x06: ATA66, channel
0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <E-IDE, CD-ROM 40X/AKU, U30> SCSI0 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 4 function 2 "VIA VT83C572 USB" rev 0x08: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 4 function 3 "VIA VT82C596 Power Mgmt" rev 0x20
bktr0 at pci0 dev 9 function 0 "Brooktree BT878" rev 0x11
fun=2900006<MEM,MASTER,CAPLIST,BACK2BACK_STAT,DEVSEL_MEDIUM>pci_mapreg_map:
memt 1, memh e77a0000, size 1000
: irq 10
bktr0: AVer Media TV/FM, Philips NTSC tuner.
"Brooktree BT878 Audio" rev 0x11 at pci0 dev 9 function 1 not configured
eap0 at pci0 dev 10 function 0 "Ensoniq AudioPCI97" rev 0x07: irq 9
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
xl0 at pci0 dev 11 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 10
address 00:50:da:95:c9:27
exphy0 at xl0 phy 24: Broadcom 3C905C internal PHY, rev. 7
ahc1 at pci0 dev 12 function 0 "Adaptec AHA-2940AU" rev 0x01: irq 11
ahc1: aic7860: Ultra Single Channel A, SCSI Id=7, 3/255 SCBs
scsibus1 at ahc1: 8 targets
ahc1: target 0 synchronous at 20.0MHz, offset = 0xf
ahc1: target 0 using tagged queuing
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST318418N, 0002> SCSI3 0/direct
fixed
sd0: 19001MB, 26434 cyl, 2 head, 736 sec, 512 bytes/sec, 38914049 sec total
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 4e40 netmask 4e40 ttymask 4ec2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matched BIOS disk 80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr
2, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse0 at ums0 mux 0