[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: D-Link DWL-650
Hi all,
Now I've bought one of these too (nb, *not* a '+'/22mb version), I'm
keen to get it working under OpenBSD (works fine under W2k on same
machine).
FYI,
All the Kismet docs seem to imply it should work:
<http://www.kismetwireless.net/cards.shtml>
As does the docs for the thing itself, for linux:
<http://support.dlink.com/faq/view.asp?prod_id=462&question=dwl-650>
<http://support.dlink.com/faq/view.asp?prod_id=357&question=dwl-650>
As the pictures exactly match when I have, e.g. the antenna is
rectangular,
not fan-shaped. I'm pretty sure what I've got and dlink say it's
Intersil Prism2 based. Even if not (as the dmesg indicates it's an
ADMtek), the ADM site says it supports Linux:
<http://www.admtek.com.tw/products/ADM8211.htm>
assuming (aka guessing) that the 8201 is the sister to the 8211.
My dmesg is below, so does anyone have any ideas, before I start
disabling stuff in the BIOS in case it's just a IRQ conflict thing...
Dom
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Dom De Vitto Tel. 07855 805 271
http://www.devitto.com mailto:dom@devitto.com
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FX
SR,SIMD
real mem = 267939840 (261660K)
avail mem = 242749440 (237060K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/09/01, BIOS32 rev. 0 @
0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 94%
apm0: AC off, battery charge high, estimated 5:27 hours
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbd80/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 PCI-ISA and
IDE" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x800 0xd0800/0x800!
0xd1000/0x800 0xd1800/0x800! 0xd2000/0x800! 0xd2800/0x800! 0xd3000/0x800
0xd3800/0x800!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility M3" rev 0x02
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1420 PCI-CardBus"
rev 0x00: irq 11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1420 PCI-CardBus"
rev 0x00: irq 11
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23BA-10>
wd0: 16-sector PIO, LBA, 9590MB, 16383 cyl, 16 head, 63 sec, 19640880
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, q009> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not
configured
esa0 at pci0 dev 8 function 0 "ESS Maestro 3" rev 0x10: "ESS Maestro 3"
rev 0x10 (rev. 0x10)
esa0: interrupting at irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esa0
xl0 at pci0 dev 16 function 0 "3Com 3c556B 100Base-TX" rev 0x20: irq 11
address 00:04:76:5e:ff:d5
ukphy0 at xl0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000895, model 0x0021, rev. 11
xl0: selecting half duplex
"3Com Mini-PCI V.90 Modem" rev 0x20 at pci0 dev 16 function 1 not
configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask c840 netmask c840 ttymask d8c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
(manufacturer 0x0, product 0x0) vendor "ADMtek", unknown product 0x8201
(class network, subclass miscellaneous, rev 0x11) at cardbus1 dev 0
function 0 not configured
syncing disks... done
rebooting...
OpenBSD 3.2 (GENERIC) #25: Thu Oct 3 19:51:53 MDT 2002
deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 852 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR,SIMD
real mem = 267939840 (261660K)
avail mem = 242675712 (236988K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 04/09/01, BIOS32 rev. 0 @
0xffe90
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 96%
apm0: AC on, battery charge high, charging, estimated 5:31 hours
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfbd80/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371 PCI-ISA and
IDE" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x800 0xd0800/0x800!
0xd1000/0x800 0xd1800/0x800! 0xd2000/0x800! 0xd2800/0x800! 0xd3000/0x800
0xd3800/0x800!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility M3" rev 0x02
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 3 function 0 "Texas Instruments PCI1420 PCI-CardBus"
rev 0x00: irq 11
cbb1 at pci0 dev 3 function 1 "Texas Instruments PCI1420 PCI-CardBus"
rev 0x00: irq 11
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23BA-10>
wd0: 16-sector PIO, LBA, 9590MB, 16383 cyl, 16 head, 63 sec, 19640880
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <SAMSUNG, CD-ROM SN-124, q009> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not
configured
esa0 at pci0 dev 8 function 0 "ESS Maestro 3" rev 0x10: "ESS Maestro 3"
rev 0x10 (rev. 0x10)
esa0: interrupting at irq 5
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at esa0
xl0 at pci0 dev 16 function 0 "3Com 3c556B 100Base-TX" rev 0x20: irq 11
address 00:04:76:5e:ff:d5
ukphy0 at xl0 phy 0: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000895, model 0x0021, rev. 11
xl0: selecting half duplex
"3Com Mini-PCI V.90 Modem" rev 0x20 at pci0 dev 16 function 1 not
configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask c840 netmask c840 ttymask d8c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
(manufacturer 0x0, product 0x0) vendor "ADMtek", unknown product 0x8201
(class network, subclass miscellaneous, rev 0x11) at cardbus1 dev 0
function 0 not configured