[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Sony Vaio PCG-FX-802 openBSD 3.2 trouble



My newly Acquired Sony Vaio PCG-FX-802 portable does not boot the generic
openBSD 3.2 kernel.

The only way to boot is with the -c option and to disable AUVIA.

The Xfree86 freezes up the whole machine with a black screen (real freeze no
connection via ssh or whatever possible)
The USB ports are not functioning neither.

Please fin hereby the output of DMESG

Regards,

Peter De Muer

-----------------------------------------------------------------------------
-----------------------------------------------------------------------------
-
OpenBSD 3.2 (GENERIC) #25: Thu Oct  3 19:51:53 MDT 2002
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD K7 (Athlon) ("AuthenticAMD" 686-class) 1.30 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,S
IMD
real mem  = 267956224 (261676K)
avail mem = 242692096 (237004K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
User Kernel Config
UKC> disable auvia
 60 auvia* disabled
UKC> quit
Continuing...
mainbus0 (root)
bios0 at mainbus0: AT/286+(fb) BIOS, date 08/13/02, BIOS32 rev. 0 @ 0xfd6a0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
pcibios0 at bios0: rev. 2.1 @ 0xfd6a0/0x960
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfdf60/128 (6 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("VIA VT82C596A PCI-ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xd0000/0x4000! 0xdc000/0x4000!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8363 Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "VIA VT8363 PCI-AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility 1" rev 0x64
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 PCI-ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel
0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N030ATCS04-0>
wd0: 16-sector PIO, LBA, 28615MB, 16383 cyl, 16 head, 63 sec, 58605120
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, UJDA730 DVD/CDRW, 1.00> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x0000 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pcib1 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40
"VIA VT82C686 AC97 Audio" rev 0x50 at pci0 dev 7 function 5 not configured
"VIA VT82C686 AC97 Modem" rev 0x30 at pci0 dev 7 function 6 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1420 PCI-CardBus" rev
0x00: irq 9
cbb1 at pci0 dev 10 function 1 "Texas Instruments PCI1420 PCI-CardBus" rev
0x00: irq 10
"Texas Instruments TSB12LV26 FireWire" rev 0x00 at pci0 dev 14 function 0 not
configured
rl0 at pci0 dev 16 function 0 "Realtek 8139" rev 0x10: irq 10 address
08:00:46:70:03:21
rlphy0 at rl0 phy 0: RTL internal phy
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220/24 irq 5 drq 1: dsp v3.02
midi0 at sb0: <SB MIDI UART>
audio0 at sb0
opl0 at sb0: model OPL3
midi1 at opl0: <SB Yamaha OPL3>
pcppi0 at isa0 port 0x61
midi2 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
isa at pcib1 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
biomask c640 netmask c640 ttymask d6c2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2