[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
cd not found after firmware update
I just updated the firmware for my Matsushita CW-7502 in order for it to
work properly with cdrdao. I went from revision 4.10 to 4.17. Now my
cdrecorder is not found when the system boots. I am running -current from
about three months ago, but tried to boot with the 3.0 as well as 2.9 cd's
and the cd was not recognized by either of those versions as well.
My questions are: Does anyone know anything about this particular problem I
am having?
Is there something as simple as a little used kernel option that might help?
The dmesg from when it was working is below and after that, just the diff of
after the upgrade.
Thanks for any help.
OpenBSD 3.0-current (USB) #0: Tue Jan 15 18:59:08 GMT 2002
root@gaucho:/usr/src/sys/arch/i386/compile/USB
cpu0: AMD Athlon Model 1 ("AuthenticAMD" 686-class) 549 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,MMX
real mem = 133738496 (130604K)
avail mem = 118484992 (115708K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(25) BIOS, date 03/14/00, BIOS32 rev. 0 @ 0xfb390
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0xb810
pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xfde60/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("AMD 756 Power Mgmt" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "AMD 751 System Controller" rev 0x23
ppb0 at pci0 dev 1 function 0 "AMD 751 PCI-PCI" rev 0x01
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "3DFX Interactive Voodoo3" rev 0x01
wsdisplay0 at vga1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "AMD 756 PCI-ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "AMD 756 IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST317221A>
wd0: 32-sector PIO, LBA, 16446MB, 16383 cyl, 16 head, 63 sec, 33683328
sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 90845D4>
wd1: 16-sector PIO, LBA, 8063MB, 16383 cyl, 16 head, 63 sec, 16514064
sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-ROM DVD-104, 1.18> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"AMD 756 Power Mgmt" rev 0x03 at pci0 dev 7 function 3 not configured
ohci0 at pci0 dev 7 function 4 "AMD 756 USB Host" rev 0x06: irq 11, OHCI
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x0000 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ahc1 at pci0 dev 8 function 0 "Adaptec AIC-7850" rev 0x01: irq 5
ahc1: Single Channel A, SCSI Id=7, 3/255 SCBs
ahc1: Host Adapter Bios disabled. Using default SCSI device parameters
scsibus1 at ahc1: 8 targets
ahc1: target 0 synchronous at 10.0MHz, offset = 0x8
cd1 at scsibus1 targ 0 lun 0: <MATSHITA, CD-R CW-7502, 4.10> SCSI2 5/cdrom
removable
ne3 at pci0 dev 9 function 0 "Winbond Linksys EtherPCI II" rev 0x00: irq 12
ne3: address 00:20:78:15:06:77
"Sigma Designs DVDmagic-PRO" rev 0x02 at pci0 dev 10 function 0 not
configured
emu0 at pci0 dev 11 function 0 "Creative Labs SoundBlaster Live" rev 0x06:
irq 11
ac97: codec id 0x83847609 (SigmaTel STAC9721/23)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at emu0
"Creative Labs SoundBlaster Digital Input" rev 0x06 at pci0 dev 11 function
1 not configured
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask c860 netmask d860 ttymask d8e2
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
wd0: no disk label
dkcsum: wd0 matched BIOS disk 80
dkcsum: wd1 matched BIOS disk 81
root on wd1a
rootdev=0x10 rrootdev=0x310 rawdev=0x312
and the diff or rather the things that are missing after the firmware
upgrade.
< ahc1: target 0 synchronous at 10.0MHz, offset = 0x8
< cd1 at scsibus1 targ 0 lun 0: <MATSHITA, CD-R CW-7502, 4.10> SCSI2 5/cdrom
removable
_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com