[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

network issue

I have a problem in obsd3 network.

I have this.  rl0 is working fine!

EurecaBoX# ifconfig -a
lo0: flags=8009<UP,LOOPBACK,MULTICAST> mtu 33224
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000
lo1: flags=8008<LOOPBACK,MULTICAST> mtu 33224
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        media: Ethernet autoselect (100baseTX)
        status: active
        inet 200.198.aaa.bbb netmask 0xfffffff8 broadcast 200.198.aaa.bbbc
        inet6 fe80::2e0:7dff:fe81:478b%rl0 prefixlen 64 scopeid 0x1
rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        media: Ethernet autoselect (none)
        status: no carrier
        inet6 fe80::2e0:7dff:fe81:4791%rl1 prefixlen 64 scopeid 0x2
        inet 192.168.0.20 netmask 0xffffff00 broadcast 192.168.0.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33224
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
sl1: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 296
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
ppp1: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
tun0: flags=10<POINTOPOINT> mtu 3000
tun1: flags=10<POINTOPOINT> mtu 3000
enc0: flags=0<> mtu 1536
bridge0: flags=0<> mtu 1500
bridge1: flags=0<> mtu 1500
vlan0: flags=0<> mtu 1500
vlan1: flags=0<> mtu 1500
gre0: flags=8010<POINTOPOINT,MULTICAST> mtu 1450
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280


urecaBoX# route show
Routing tables

Internet:
Destination      Gateway            Flags
default          200.198.aaa.ade    UG
127.0.0.0        localhost.terra.co UG
localhost.terra. localhost.terra.co UH
192.168.0.0      link#1             U
200.198.aaa.add  link#1             U
200.198.aaa.ade  0:d0:9:fc:46:c4    UH
EurecaBoX        localhost.terra.co UGH
BASE-ADDRESS.MCA localhost.terra.co U

Internet6:
Destination      Gateway            Flags
default          ::1                UG
default          ::1                UG
::1              ::1                UH
::127.0.0.0      ::1                UG
::224.0.0.0      ::1                UG
::255.0.0.0      ::1                UG
::ffff:0.0.0.0   ::1                UG
2002::           ::1                UG
2002:7f00::      ::1                UG
2002:e000::      ::1                UG
2002:ff00::      ::1                UG
fe80::           ::1                UG
fe80::%rl0       link#1             U
fe80::%rl1       link#2             U
fe80::%lo0       fe80::1%lo0        U
fec0::           ::1                UG
ff01::           ::1                U
ff02::%rl0       link#1             U
ff02::%rl1       link#2             U
ff02::%lo0       fe80::1%lo0        U
EurecaBoX#

If i try to ping rl1 i got error:
EurecaBoX# ping 192.168.0.20
PING 192.168.0.20 (192.168.0.20): 56 data bytes
ping: sendto: Host is down
ping: wrote 192.168.0.20 64 chars, ret=-1

I have to set a special route to link#2? How i set it?

Thanks




Ricardo Augusto de Souza
Network Admin. 
Information Management 
ricardo@infom.com.br
(55) 11-3253-6303