[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Newbie Q: PCMCIA/Cardbus

To: <misc@openbsd.org>
Subject: Newbie Q: PCMCIA/Cardbus
From: "Alex Anglin" <alex@yucc.yorku.ca>
Date: Mon, 22 Jan 2001 17:12:10 -0500
Importance: Normal

Hi,

I recently installed OpenBSD 2.8 on my laptop after the ESS Maestro chip got
support and am as of yet unable to get network access via either of my
network/multifunction cards. I am using a 3Com 3CXEM556B (pcmcia) card and a
Xircom CBEM56G-100 (cardbus) card.

Looking around I've found a couple things which would lead me to believe
that these two cards can work under OpenBSD:

3CXEM556:
http://lists.openresources.com/OpenBSD/source-changes/msg00560.html
CBEM56G: http://www.geocrawler.com/archives/3/256/2000/11/0/4658831/

Anyway, if anyone has had any success with these or knows what I'm not
doing; could you please e-mail me with any pointers/suggestions/resolutions.
It would be greatly appreciated. So far I've checked all the resources I can
think of with no success.

I've also included the dmesg for my laptop with this message.

Thanks in advance

Alex Anglin

OpenBSD 2.8-current (GENERIC) #435: Tue Jan 16 20:40:14 MST 2001
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 20<config_unit>
cpu0: Intel Celeron (Mendocino) ("GenuineIntel" 686-class, 256KB L2 cache)
333 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 66695168 (65132K)
avail mem = 56729600 (55400K)
using 839 buffers containing 3436544 bytes (3356K) of memory
RTC BIOS diagnostic error 20<config_unit>
mainbus0 (root)
bios0 at mainbus0: AT/286+(47) BIOS, date 05/15/99, BIOS32 rev. 0 @ 0xeb1e0
apm0 at bios0: Power Management spec V1.2
apm0: AC unknown, no battery
pcibios0 at bios0: rev. 2.1 found at 0xe8000[0x700]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfe840, size 160 bytes (8
entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB (Triton) PCI-ISA"
rev 0x00)
pcibios0: PCI bus #3 is the last bus
pci_addr_fixup: 000:10:0 0x104c 0xac1c new address 0x04000000
pci_addr_fixup: 000:10:1 0x104c 0xac1c new address 0x04001000
pci_addr_fixup: 000:12:0 0x1105 0x8300 new address 0x04100000
pci_addr_fixup: 000:13:0 0x104c 0x8009 new address 0x04002000
pci_addr_fixup: 000:13:0 0x104c 0x8009 new address 0x04004000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
"ATI Mach64 LB" rev 0xdc at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4309MAT>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 4126MB, 8944 cyl, 15 head, 63 sec, 8452080 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TORiSAN, DVD-ROM DRD-U424, 1.04> SCSI0
5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2
wd1 at pciide0 channel 1 drive 1: <TOSHIBA MK4309MAT>
wd1: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd1: 16-sector PIO, LBA, 4126MB, 8944 cyl, 15 head, 63 sec, 8452080 sectors
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data
transfers)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function 3
not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1225 PCI-CardBus" rev
0x01
cbb1 at pci0 dev 10 function 1 "Texas Instruments PCI1225 PCI-CardBus" rev
0x01
"Sigma Designs DVDmagic-PRO" rev 0x02 at pci0 dev 12 function 0 not
configured
vendor "Texas Instruments", unknown product 0x8009 (class serial bus,
subclass Firewire, rev 0x01) at pci0 dev 13 function 0 not configured
maestro0 at pci0 dev 16 function 0 "ESS Maestro 2E" rev 0x10
maestro0: interrupting at irq 5, ac97: codec id 0x414b4d00 (Asahi Kasei
AK4540)
ac97: codec features No 3D Stereo
audio0 at maestro0
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
cbb0: irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cbb1: irq 10
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
biomask c440 netmask c440 ttymask d4c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
wd1: no disk label
dkcsum: wd1 had no matching BIOS disk
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

OpenBSD 2.8-current (GENERIC) #435: Tue Jan 16 20:40:14 MST 2001
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
RTC BIOS diagnostic error 20<config_unit>
cpu0: Intel Celeron (Mendocino) ("GenuineIntel" 686-class, 256KB L2 cache) 333 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SYS,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 66695168 (65132K)
avail mem = 56729600 (55400K)
using 839 buffers containing 3436544 bytes (3356K) of memory
RTC BIOS diagnostic error 20<config_unit>
mainbus0 (root)
bios0 at mainbus0: AT/286+(47) BIOS, date 05/15/99, BIOS32 rev. 0 @ 0xeb1e0
apm0 at bios0: Power Management spec V1.2
apm0: AC unknown, no battery
pcibios0 at bios0: rev. 2.1 found at 0xe8000[0x700]
pcibios0: PCI IRQ Routing Table rev. 1.0 found at 0xfe840, size 160 bytes (8 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB (Triton) PCI-ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
pci_addr_fixup: 000:10:0 0x104c 0xac1c new address 0x04000000
pci_addr_fixup: 000:10:1 0x104c 0xac1c new address 0x04001000
pci_addr_fixup: 000:12:0 0x1105 0x8300 new address 0x04100000
pci_addr_fixup: 000:13:0 0x104c 0x8009 new address 0x04002000
pci_addr_fixup: 000:13:0 0x104c 0x8009 new address 0x04004000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
"ATI Mach64 LB" rev 0xdc at pci1 dev 0 function 0 not configured
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK4309MAT>
wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0: 16-sector PIO, LBA, 4126MB, 8944 cyl, 15 head, 63 sec, 8452080 sectors
pciide0: channel 0 interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TORiSAN, DVD-ROM DRD-U424, 1.04> SCSI0 5/cdrom removable
cd0: can use 32-bit, PIO mode 4, DMA mode 2
wd1 at pciide0 channel 1 drive 1: <TOSHIBA MK4309MAT>
wd1: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd1: 16-sector PIO, LBA, 4126MB, 8944 cyl, 15 head, 63 sec, 8452080 sectors
pciide0: channel 1 interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
"Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 7 function 2 not configured
"Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 7 function 3 not configured
cbb0 at pci0 dev 10 function 0 "Texas Instruments PCI1225 PCI-CardBus" rev 0x01
cbb1 at pci0 dev 10 function 1 "Texas Instruments PCI1225 PCI-CardBus" rev 0x01
"Sigma Designs DVDmagic-PRO" rev 0x02 at pci0 dev 12 function 0 not configured
vendor "Texas Instruments", unknown product 0x8009 (class serial bus, subclass Firewire, rev 0x01) at pci0 dev 13 function 0 not configured
maestro0 at pci0 dev 16 function 0 "ESS Maestro 2E" rev 0x10
maestro0: interrupting at irq 5, ac97: codec id 0x414b4d00 (Asahi Kasei AK4540)
ac97: codec features No 3D Stereo
audio0 at maestro0
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
vt0 at isa0 port 0x60/16 irq 1: vga 80 col, color, 8 scr, mf2-kbd
pms0 at vt0 irq 12
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
cbb0: irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cbb1: irq 10
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
biomask c440 netmask c440 ttymask d4c2
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matched BIOS disk 80
wd1: no disk label
dkcsum: wd1 had no matching BIOS disk
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Follow-Ups:
- Re: Newbie Q: PCMCIA/Cardbus
  - From: Aaron Campbell <aaron@monkey.org>

Prev by Date: ipf & kernel options/pseudo-devices
Next by Date: RE: GNOME/ORBit && OpenBSD
Prev by thread: ipf & kernel options/pseudo-devices
Next by thread: Re: Newbie Q: PCMCIA/Cardbus
Index(es):
- Date
- Thread