Fw: SPARCstation 10 won't boot from cd35.iso

[Ian Grant <Ian.Grant@cl.cam.ac.uk>]

Sorry, I first sent this to misc by mistake.

Begin forwarded message:

Date: Wed, 12 May 2004 13:11:52 +0100
From: Ian Grant <Ian.Grant@cl.cam.ac.uk>
To: misc@openbsd.org
Cc: Ian.Grant@cl.cam.ac.uk
Subject: SPARCstation 10 won't boot from cd35.iso


I have a SS10 which boots OK from the 3.4 CD-ROM boot image, but fails
with 3.5. I get an error:

SPARCStation 10 (1 x 390Z55), No keyboard
ROM Rev 2.10, 224MB memory installed, Serial #blah
Ethernet address: ...

Rebooting with command: cdrom 3.5/sparc/bsd.rd
Boot device: /iommu/sbus/espdma@f,40000/esp@f,80000/sd@6,0:d File and
args: 3.5/sparc/bsd.rd
bootxx: short read
Program terminated

and it bails out to the 'ok' prompt. I have checked the MD5 sum of the
CD-ROM.

Booting from the 3.5 bsd.rd on the hard disk is fine.

I am happy to test possible fixes.

Ian

OpenBSD 3.5 (GENERIC) #81: Mon Mar 29 12:03:28 MST 2004
    deraadt@sparc.openbsd.org:/usr/src/sys/arch/sparc/compile/GENERIC
real mem = 234221568
avail mem = 213569536
using 200 buffers containing 11710464 bytes of memory
bootpath:
/iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@3,0
mainbus0 (root): SUNW,SPARCstation-10
cpu0 at mainbus0: TMS390Z50 v0 or TMS390Z55 @ 60 MHz, on-chip FPU
cpu0: physical 20K instruction (64 b/l), 16K data (32 b/l), 1024K
external (32 b
/l) cache enabled
obio0 at mainbus0
clock0 at obio0 addr 0xf1200000: mk48t08 (eeprom)
timer0 at obio0 addr 0xf1300000 delay constant 28
zs0 at obio0 addr 0xf1100000 pri 12, softpri 6
zstty0 at zs0 channel 0 (console i/o)
zstty1 at zs0 channel 1
zs1 at obio0 addr 0xf1000000 pri 12, softpri 6
zskbd0 at zs1 channel 0: reset timeout
zskbd0: no keyboard
zstty2 at zs1 channel 1: mouse
fdc0 at obio0 addr 0xf1700000 pri 11, softpri 4: chip 82077
auxreg0 at obio0 addr 0xf1800000
power0 at obio0 addr 0xf1a01000
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x3/0x0, page-size 4096,
range 64M
B
sbus0 at iommu0: clock = 20 MHz
dma0 at sbus0 slot 15 offset 0x400000: rev 2
esp0 at dma0 offset 0x800000 pri 4: ESP200, 40MHz, SCSI ID 7
scsibus0 at esp0: 8 targets
sd0 at scsibus0 targ 3 lun 0: <SEAGATE, ST32155N, 0532> SCSI2 0/direct
fixed
sd0: 2049MB, 4177 cyl, 8 head, 125 sec, 512 bytes/sec, 4197405 sec total
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM-5401TASUN4XCD, 1036> SCSI2
5/cdrom re
movable
ledma0 at sbus0 slot 15 offset 0x400010: rev 2
le0 at ledma0 offset 0xc00000 pri 6: address 08:00:20:18:75:c5
le0: 16 receive buffers, 4 transmit buffers
bpp0 at sbus0 slot 15 offset 0x4800000: DMA2
SUNW,DBRIe at sbus0 slot 15 offset 0x8010000 not configured
root on sd0a
rootdev=0x700 rrootdev=0x1100 rawdev=0x1102