[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: dhclient core dump in current.
You got to do all the steps named in the mini-faq. I had the same
issue and it went away after I did everything by the letter.
See http://www.openbsd.com/faq/upgrade-minifaq.html
On May 11, 2004, at 2:10 PM, Sigfred Håversen wrote:
>> Originator: Sigfred Haversen
>> Organization:
> net
>> Synopsis: dhclient core dump
>> Severity: non-critical
>> Priority: medium
>> Category: system
>> Class: sw-bug
>> Release: 3.5-current
>> Environment:
> System : OpenBSD 3.5
> Architecture: OpenBSD.i386
> Machine : i386
>> Description:
> dhclient core dumps at boot, or when run manually.
> Problem persists even after "cvs up" for a couple of days. I've
> checked that
> the new user/group _dhcp is added, and I've also removed the lease
> files as
> well.
>> How-To-Repeat:
> "sudo dhclient bge0" will core dump.
>> Fix:
> Not know.
>
> dmesg below :
>
> OpenBSD 3.5-current (GENERIC) #2: Tue May 11 08:03:22 CEST 2004
> sigfred@snorre.mumak.com:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 2.40GHz ("GenuineIntel" 686-class)
> 2.40 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36
> ,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID
> real mem = 536440832 (523868K)
> avail mem = 489144320 (477680K)
> using 4278 buffers containing 26923008 bytes (26292K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(23) BIOS, date 06/03/03, BIOS32 rev. 0 @
> 0xf1d80
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x23f2
> pcibios0: PCI IRQ Routing Table rev. 1.0 @ 0xf2320/208 (11 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev
> 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xf400 0xd0000/0x4000!
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x255d
> rev 0x03
> vendor "Intel", unknown product 0x2551 (class undefined unknown
> subclass 0x00, rev 0x03) at pci0 dev 0 function 1 not configured
> ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x2552
> rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "Nvidia GeForce FX 5200" rev 0xa1
> wsdisplay0 at vga1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: irq 11
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: irq 9
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: irq 9
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0x82
> pci2 at ppb1 bus 2
> wi0 at pci2 dev 1 function 0 "Intersil PRISM2.5 Mini-PCI WLAN" rev
> 0x01: irq 9
> wi0: PRISM2.5 ISL3874A(Mini-PCI), Firmware 1.1.1 (primary), 1.7.4
> (station), address 00:09:5b:91:aa:a1
> "Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci2 dev 3 function
> 0 not configured
> bge0 at pci2 dev 5 function 0 "Broadcom BCM5702X" rev 0x02: irq 9:
> address: 00:0c:6e:05:92:08
> brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseTX PHY, rev. 2
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02
> pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> wd0 at pciide0 channel 0 drive 0: <IC35L120AVV207-0>
> wd0: 16-sector PIO, LBA48, 117800MB, 241254720 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <LITE-ON, LTR-48246S, SS0B> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97 Audio" rev 0x02:
> irq 5, ICH4 AC97
> ac97: codec id 0x414c4720 (Avance Logic ALC650)
> ac97: codec features 20 bit DAC, 18 bit ADC, Realtek 3D
> audio0 at auich0
> auich0: measured ac97 link rate at 48003 Hz, will use 48000 Hz
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask ca40 netmask ca40 ttymask cac2
> pctr: user-level cycle counter enabled
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> uhidev0 at uhub0 port 1 configuration 1 interface 0
> uhidev0: Logitech USB Receiver, rev 1.10/16.00, addr 2, iclass 3/1
> ums0 at uhidev0: 7 buttons and Z dir.
> wsmouse0 at ums0 mux 0