[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

system/1869: Failed install on Compaq DL-360 server

>Number:         1869
>Category:       system
>Synopsis:       Failed install on Compaq DL-360 server
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    bugs
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Jun 11 09:30:01 MDT 2001
>Originator:     Charlie Root
>Release:        1869
        System      : OpenBSD 2.9
        Architecture: OpenBSD.i386
        Machine     : i386 - Compaq ProLiant DL 360 server

Install on Compaq Proliant DL-360 has failed. No disks are found due to
error with Compaq
Integrated Array. Other operating systems (FreeBSD, Linux) have found disks
on the same machine.
Dmesg after boot from install floppy disk:

OpenBSD 2.9 (RAMDISKB) #269: Sat Apr 28 14:25:31 MDT 2001
cpu0: Intel Pentium III (Coppermine) ("GenuineIntel" 686-class) 1 GHz
real mem  = 536440832 (523868K)
avail mem = 493584384 (482016K)
using 5689 buffers containing 26923008 bytes (26292K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev. 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 6 Interrupt Routing table entries
pcibios: no compatible PCI ICU found
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xe8000/0x6000
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Reliance Computer CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "Reliance Computer CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
fxp0 at pci1 dev 4 function 0 "Intel 82557" rev 0x08: irq 5, address
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
fxp1 at pci1 dev 5 function 0 "Intel 82557" rev 0x08: irq 7, address
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 3 Compaq
Integrated Array
vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1: console (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
"Reliance Computer ROSB4 SouthBridge" rev 0x51 at pci0 dev 15 function 0 not
pciide0 at pci0 dev 15 function 1 "Reliance Computer IDE" rev 0x00: DMA
(unsupported), channel 0 configured to
 compatibility, channel 1 configured to compatibility
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 interrupting at irq 15
atapiscsi0 at pciide0 channel 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <COMPAQ, CD-ROM CRN-8241B, 2.23> SCSI0 5/cdrom
isa0 at mainbus0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 8048 netmask 80e8 ttymask 80ea
rd0: fixed, 3560 blocks
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02

Boot floppyB29.fs on DL-360 and no disk are found in the setup.

I don't know.

To: gnats@openbsd.org
Subject: Failed install on Compaq DL-360 server
From: vaclmouc@oskarmobil.cz
Reply-To: vaclmouc@oskarmobil.cz
X-sendbug-version: 3.97