[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: Anyone please???? SMP & general health check!!



I put this to the smp list and to stable but have had no
takers from wither. nThere are both smp and other system
issues and I am just wondering if anyoe would be willing to
take a look at this output from dmesg and let me have some
advice

Thanks

david
----- Original Message -----
From: "vizion communication" <vizion_(_at_)_ixpres_(_dot_)_com>
To: <freebsd-smp_(_at_)_freebsd_(_dot_)_org>
Sent: Wednesday, April 23, 2003 9:03 PM
Subject: Anyone please???? SMP health check!!


> I posted this a few days back but have had no takers...
>
> I hope you will not mind if I repeat the query??
>
> David
> ----- Original Message -----
> From: "vizion communication" <vizion_(_at_)_ixpres_(_dot_)_com>
> To: <freebsd-smp_(_at_)_freebsd_(_dot_)_org>
> Sent: Monday, April 21, 2003 8:23 AM
> Subject: SMP health check!!
>
>
> > Hi
> >
> > OK I have a quad processor proliant 5500 and am
uncertain
> > whether I am getting the performance I would expect from
> it.
> >
> > There are entries in dmesg which clearly relate to SMP I
> do
> > not understand so here is all the output -- comments &
> > guidance appreciated.
> >
>
> ----------------------------------------------------------
> >
> > Copyright (c) 1992-2002 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
> > 1992, 1993, 1994
> > The Regents of the University of California. All rights
> > reserved.
> > FreeBSD 4.7-RELEASE #0: Sun Feb 16 17:25:33 PST 2003
> >     root_(_at_)_dns3_(_dot_)_vizion2000_(_dot_)_net:/usr/obj/usr/src/sys/COMPAQ
> > Timecounter "i8254"  frequency 1193182 Hz
> > CPU: Pentium III/Pentium III Xeon/Celeron (499.84-MHz
> > 686-class CPU)
> >   Origin = "GenuineIntel"  Id = 0x672  Stepping = 2
> >
> >
>
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,S
> > EP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> > real memory  = 2147467264 (2097136K bytes)
> > config> di sn0
> > config> di lnc0
> > config> di ie0
> > config> di fe0
> > config> di cs0
> > config> q
> > avail memory = 2086445056 (2037544K bytes)
> > APIC_IO: MP table broken: 8259->APIC entry missing!
> > Changing APIC ID for IO APIC #0 from 0 to 8 on chip
> > Programming 35 pins in IOAPIC #0
> > IOAPIC #0 intpin 2 -> irq 0
> > FreeBSD/SMP: Multiprocessor motherboard
> >  cpu0 (BSP): apic id:  3, version: 0x00040011, at
> 0xfee00000
> >  cpu1 (AP):  apic id:  0, version: 0x00040011, at
> 0xfee00000
> >  cpu2 (AP):  apic id:  1, version: 0x00040011, at
> 0xfee00000
> >  cpu3 (AP):  apic id:  2, version: 0x00040011, at
> 0xfee00000
> >  io0 (APIC): apic id:  8, version: 0x00220011, at
> 0xfec00000
> > Preloaded elf kernel "kernel" at 0xc051f000.
> > Preloaded userconfig_script "/boot/kernel.conf" at
> > 0xc051f09c.
> > Pentium Pro MTRR support enabled
> > md0: Malloc disk
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > pcib0: <Intel 82454NX PXB#0, Bus#A> on motherboard
> > pci0: <PCI bus> on pcib0
> > pcib1: <PCI to PCI bridge (vendor=8086 device=5200)> at
> > device 1.0 on pci0
> > pci1: <PCI bus> on pcib1
> > pci0: <unknown card> (vendor=0x8086, dev=0x5201) at 1.1
> irq
> > 9
> > pci0: <NVidia Riva Ultra Vanta TNT2 graphics
accelerator>
> at
> > 2.0 irq 5
> > pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 12.0
> > sym0: <875> port 0x2000-0x20ff mem
> > 0xc4fd0000-0xc4fd0fff,0xc4fe0000-0xc4fe00ff irq 10 at
> device
> > 13.0 on pci0
> > sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
> > sym1: <875> port 0x2400-0x24ff mem
> > 0xc4fb0000-0xc4fb0fff,0xc4fc0000-0xc4fc00ff irq 15 at
> device
> > 13.1 on pci0
> > sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
> > pci0: <ATI Mach64-GV graphics accelerator> at 14.0
> > isab0: <Intel 82371AB PCI to ISA bridge> at device 15.0
on
> > pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel PIIX4 ATA33 controller> port
0x2c00-0x2c0f
> > at device 15.1 on pci0
> > ata0: at 0x1f0 irq 14 on atapci0
> > ata1: at 0x170 irq 15 on atapci0
> > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port
> > 0x2c20-0x2c3f at device 15.2 on pci0
> > pci_cfgintr: can't route an interrupt to 0:15 INTD
> > uhci0: Could not allocate irq
> > device_probe_and_attach: uhci0 attach returned 6
> > Timecounter "PIIX"  frequency 3579545 Hz
> > chip0: <Intel 82371AB Power management controller> port
> > 0x1240-0x124f at device 15.3 on pci0
> > pcib2: <Intel 82454NX PCI Expander Bridge> at device
18.0
> on
> > pci0
> > pcib3: <Intel 82454NX PCI Expander Bridge> at device
19.0
> on
> > pci0
> > pcib4: <Intel 82454NX PXB#0, Bus#B> on motherboard
> > pci4: <PCI bus> on pcib4
> > pcib5: <IBM 82351 PCI-PCI bridge> at device 1.0 on pci4
> > pci5: <PCI bus> on pcib5
> > ida0: <Compaq Smart Array 3200 controller> port
> > 0x4000-0x40ff mem 0xc6ef0000-0xc6ef00ff irq 15 at device
> 0.0
> > on pci5
> > ida0: drives=4 firm_rev=4.06
> > idad0: <Compaq Logical Drive> on ida0
> > idad0: 24997MB (51195840 sectors), blocksize=512
> > idad1: <Compaq Logical Drive> on ida0
> > idad1: 14997MB (30714240 sectors), blocksize=512
> > idad2: <Compaq Logical Drive> on ida0
> > idad2: 12096MB (24773760 sectors), blocksize=512
> > idad3: <Compaq Logical Drive> on ida0
> > idad3: 26029MB (53309280 sectors), blocksize=512
> > ahc0: <Adaptec 2940 SCSI adapter> port 0x3000-0x30ff mem
> > 0xc6df0000-0xc6df0fff irq 11 at device 2.0 on pci4
> > aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
> > pcib6: <DEC 21152 PCI-PCI bridge> at device 5.0 on pci4
> > pci6: <PCI bus> on pcib6
> > de0: <Digital 21140A Fast Ethernet> port 0x5000-0x507f
mem
> > 0xc6ff0000-0xc6ff007f irq 9 at device 4.0 on pci6
> > de0: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
> > de0: address 00:00:d1:1c:c4:f9
> > de1: <Digital 21140A Fast Ethernet> port 0x5080-0x50ff
mem
> > 0xc6fe0000-0xc6fe007f irq 9 at device 5.0 on pci6
> > de1: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
> > de1: address 00:00:d1:1c:c4:fa
> > de2: <Digital 21140A Fast Ethernet> port 0x5400-0x547f
mem
> > 0xc6fd0000-0xc6fd007f irq 9 at device 6.0 on pci6
> > de2: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
> > de2: address 00:00:d1:1c:c4:fb
> > de3: <Digital 21140A Fast Ethernet> port 0x5480-0x54ff
mem
> > 0xc6fc0000-0xc6fc007f irq 9 at device 7.0 on pci6
> > de3: Cogent EM440TX 21140A [10-100Mb/s] pass 2.2
> > de3: address 00:00:d1:1c:c4:fc
> > eisa0: <EISA bus> on motherboard
> > mainboard0: <CPQ0808 (System Board)> on eisa0 slot 0
> > orm0: <Option ROMs> at iomem
> 0xe8000-0xedfff,0xee000-0xeffff
> > on isa0
> > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq
> 6
> > drq 2 on isa0
> > fdc0: FIFO enabled, 8 bytes threshold
> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64
> on
> > isa0
> > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> > kbd0 at atkbd0
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: model IntelliMouse Explorer, device ID 4
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> > 0xa0000-0xbffff on isa0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> > sio0: type 16550A
> > sio1 at port 0x2f8-0x2ff irq 3 on isa0
> > sio1: type 16550A
> > ppc0: cannot reserve I/O port range
> > APIC_IO: Testing 8254 interrupt delivery
> > APIC_IO: routing 8254 via IOAPIC #0 intpin 2
> > SMP: AP CPU #3 Launched!
> > SMP: AP CPU #1 Launched!
> > SMP: AP CPU #2 Launched!
> > acd0: CDROM <CDU5211> at ata0-master PIO4
> > Waiting 15 seconds for SCSI devices to settle
> > de1: enabling Full Duplex 100baseTX port
> > de0: enabling 10baseT port
> > de2: enabling 10baseT port
> > de0: link down: cable problem?
> > de2: link down: cable problem?
> > de3: autosense failed: cable problem?
> > (probe31:ahc0:0:1:0): SCB 0x5 - timed out
> > ahc0: Dumping Card State in Message-out phase, at
SEQADDR
> > 0xe3
> > ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0x8c, ARG_2 = 0x0
> > HCNT = 0x0 SCBPTR = 0x2
> > SCSISEQ = 0x12, SBLKCTL = 0x0
> >  DFCNTRL = 0x0, DFSTATUS = 0x29
> > LASTPHASE = 0xa0, SCSISIGI = 0xb6, SXFRCTL0 = 0x88
> > SSTAT0 = 0x7, SSTAT1 = 0x3
> > STACK == 0xe1, 0xfb, 0x156, 0x0
> > SCB count = 10
> > Kernel NEXTQSCB = 7
> > Card NEXTQSCB = 3
> > QINFIFO entries: 3 2 9 8
> > Waiting Queue entries:
> > Disconnected Queue entries: 1:5
> > QOUTFIFO entries:
> > Sequencer Free SCB List: 0 3 4 5 6 7 8 9 10 11 12 13 14
15
> > Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0xff) 1(c
> 0x44,
> > s 0x17, l 0, t 0x5) 2(c 0x40, s 0x27, l 0, t 0x4) 3(c
0x0,
> s
> > 0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c
> > 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t
> 0xff)
> > 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255,
t
> > 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff,
l
> > 255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0,
s
> > 0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff)
14(c
> > 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t
> 0xff)
> > Pending list: 8(c 0x40, s 0x7, l 1), 9(c 0x50, s 0x67, l
> 0),
> > 2(c 0x50, s 0x57, l 0), 3(c 0x50, s 0x47, l 0), 4(c
0x40,
> s
> > 0x27, l 0), 5(c 0x40, s 0x17, l 0)
> > Kernel Free SCB list: 6 1 0
> > Untagged Q(0): 8
> > Untagged Q(1): 5
> > Untagged Q(2): 4
> > Untagged Q(4): 3
> > Untagged Q(5): 2
> > Untagged Q(6): 9
> > (probe31:ahc0:0:1:0): Other SCB Timeout
> > (probe32:ahc0:0:2:0): SCB 0x4 - timed out
> > ahc0: Dumping Card State in Message-out phase, at
SEQADDR
> > 0x15c
> > ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0x8c, ARG_2 = 0x0
> > HCNT = 0x0 SCBPTR = 0x2
> > SCSISEQ = 0x12, SBLKCTL = 0x0
> >  DFCNTRL = 0x0, DFSTATUS = 0x29
> > LASTPHASE = 0xa0, SCSISIGI = 0xb6, SXFRCTL0 = 0x88
> > SSTAT0 = 0x7, SSTAT1 = 0x3
> > STACK == 0xfb, 0x156, 0x0, 0xe1
> > SCB count = 10
> > Kernel NEXTQSCB = 7
> > Card NEXTQSCB = 3
> > QINFIFO entries: 3 2 9 8
> > Waiting Queue entries:
> > Disconnected Queue entries: 1:5
> > QOUTFIFO entries:
> > Sequencer Free SCB List: 0 3 4 5 6 7 8 9 10 11 12 13 14
15
> > Sequencer SCB Info: 0(c 0x40, s 0x7, l 0, t 0xff) 1(c
> 0x44,
> > s 0x17, l 0, t 0x5) 2(c 0x40, s 0x27, l 0, t 0x4) 3(c
0x0,
> s
> > 0xff, l 255, t 0xff) 4(c 0x0, s 0xff, l 255, t 0xff) 5(c
> > 0x0, s 0xff, l 255, t 0xff) 6(c 0x0, s 0xff, l 255, t
> 0xff)
> > 7(c 0x0, s 0xff, l 255, t 0xff) 8(c 0x0, s 0xff, l 255,
t
> > 0xff) 9(c 0x0, s 0xff, l 255, t 0xff) 10(c 0x0, s 0xff,
l
> > 255, t 0xff) 11(c 0x0, s 0xff, l 255, t 0xff) 12(c 0x0,
s
> > 0xff, l 255, t 0xff) 13(c 0x0, s 0xff, l 255, t 0xff)
14(c
> > 0x0, s 0xff, l 255, t 0xff) 15(c 0x0, s 0xff, l 255, t
> 0xff)
> > Pending list: 8(c 0x40, s 0x7, l 1), 9(c 0x50, s 0x67, l
> 0),
> > 2(c 0x50, s 0x57, l 0), 3(c 0x50, s 0x47, l 0), 4(c
0x40,
> s
> > 0x27, l 0), 5(c 0x40, s 0x17, l 0)
> > Kernel Free SCB list: 6 1 0
> > Untagged Q(0): 8
> > Untagged Q(1): 5
> > Untagged Q(2): 4
> > Untagged Q(4): 3
> > Untagged Q(5): 2
> > Untagged Q(6): 9
> > (probe32:ahc0:0:2:0): BDR message in message buffer
> > (probe32:ahc0:0:2:0): no longer in timeout, status = 300
> > Mounting root from ufs:/dev/idad0s1a
> > da0 at ahc0 bus 0 target 0 lun 0
> > da0: <SEAGATE ST34371N 0280> Fixed Direct Access SCSI-2
> > device
> > da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
> > Queueing Enabled
> > da0: 4148MB (8496960 512 byte sectors: 64H 32S/T 4148C)
> > da3 at ahc0 bus 0 target 4 lun 0
> > da3: <SEAGATE ST34371N 0280> Fixed Direct Access SCSI-2
> > device
> > da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
> > Queueing Enabled
> > da3: 4148MB (8496960 512 byte sectors: 64H 32S/T 4148C)
> > da2 at ahc0 bus 0 target 2 lun 0
> > da2: <SEAGATE ST34371N 0484> Fixed Direct Access SCSI-2
> > device
> > da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
> > Queueing Enabled
> > da2: 4148MB (8496884 512 byte sectors: 64H 32S/T 4148C)
> > da5 at ahc0 bus 0 target 6 lun 0
> > da5: <SEAGATE ST15150N 0023> Fixed Direct Access SCSI-2
> > device
> > da5: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
> > Queueing Enabled
> > da5: 4095MB (8388315 512 byte sectors: 64H 32S/T 4095C)
> > da4 at ahc0 bus 0 target 5 lun 0
> > da4: <SEAGATE ST15150N 0023> Fixed Direct Access SCSI-2
> > device
> > da4: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
> > Queueing Enabled
> > da4: 4095MB (8388315 512 byte sectors: 64H 32S/T 4095C)
> > da1 at ahc0 bus 0 target 1 lun 0
> > da1: <SEAGATE ST34371N 0484> Fixed Direct Access SCSI-2
> > device
> > da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged
> > Queueing Enabled
> > da1: 4148MB (8496884 512 byte sectors: 64H 32S/T 4148C)
> >
>
> _______________________________________________
> freebsd-smp_(_at_)_freebsd_(_dot_)_org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
> To unsubscribe, send any mail to
"freebsd-smp-unsubscribe_(_at_)_freebsd_(_dot_)_org"
>