RE: Netra t1 105: novice questions

[Dmitry Pryanishnikov <dmitry_(_at_)_atlantis_(_dot_)_dp_(_dot_)_ua>]

Hello!

On Wed, 11 Oct 2006, Alton, Matthew wrote:
> Okay.  The boot prom parameter "pcib-probe-list" is definitely your problem.
> Yours is almost certainly set to "1,2" when it must be "1,2,3"  Set the
> pcib-probe-list to "1,2,3" and you'll be cured.  The hme1 interface will show
> right up.  You'll probably have to take a boot to do it.

  Thank you! You're right, that's it. After setting pcib-probe-list to "1,2,3"
second network interface has appeared and works:

hme0: <Sun HME 10/100 Ethernet> mem 0xe0000000-0xe0007fff at device 1.1 on
	pci1
miibus0: <MII bus> on hme0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy1: <Generic IEEE 802.3u media interface> on miibus0
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: 08:00:20:c2:14:12
...
hme1: <Sun HME 10/100 Ethernet> mem 0xe0010000-0xe0017fff at device 3.1 on 
pci1
miibus1: <MII bus> on hme1
ukphy2: <Generic IEEE 802.3u media interface> on miibus1
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: 08:00:20:c2:14:12

I'm still curious (1) why there are 2 PHYs on 1st controller, and
(2) why MAC addresses are the same. But these questions are solely come
from curiosity (ifconfig hme1 lladdr other-MAC works properly).


Sincerely, Dmitry
--
Atlantis ISP, System Administrator
e-mail:  dmitry_(_at_)_atlantis_(_dot_)_dp_(_dot_)_ua
nic-hdl: LYNX-RIPE
_______________________________________________
freebsd-sparc64_(_at_)_freebsd_(_dot_)_org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64
To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe_(_at_)_freebsd_(_dot_)_org"