[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: jumping to kernel entry at 0xc0048000 error on boot cd for spacr64



You could just throw the hard drive into your other 220R and install
FreeBSD before switching it back, that would allow you at least to get
the OS running headless with SSH access, assuming that your serial
ports are somehow on the fritz.

On 1/12/06, Mario Beltran <mario_(_at_)_123_(_dot_)_hn> wrote:
> >>
> >> Hello,
> >>
> >> I want to install freebsd 6.0 for my Sun enterprise 220R but I cant.
> >>
> >> I downloaded two iso files from:
> >> ftp://ftp.freebsd.org/pub/FreeBSD/releases/sparc64/ISO-IMAGES/6.0/6.0-RELEASE-sparc64-disc1.iso
> >> and
> >> ftp://ftp.freebsd.org/pub/FreeBSD/releases/sparc64/ISO-IMAGES/6.0/6.0-RELEASE-sparc64-bootonly.iso
> >>
> >> On booth cds the installation stops in the same step. The complete
> >> message is:
> >>
> >>
> >> Sun Enterprise 220R (ultrasparc - II 450 MHz), keyboard present
> >> OpenBoot 3.23 1024 MB memory installed, serail #12050420.
> >> Ethernet address8:0:21:b7:df:d2, Host ID: 80b7dff2
> >>
> >> Initializing memory
> >> ok boot cdrom
> >> boot device: /pci_(_at_)_1f,4000/scsi_(_at_)_3/disk_(_at_)_6,0:f file and argrs:
> >>
> >>  >>FreeBSD/sparc64 boot block
> >> boot path: /pci_(_at_)_1f,4000/scsi_(_at_)_3/disk_(_at_)_6,0:f
> >> boot loader: /boot/loader
> >>
> >> consoles: open firmware console
> >>
> >> boot path set to /pci_(_at_)_1f,4000/scsi_(_at_)_3/disk_(_at_)_6,0:a
> >>
> >> FreeBSD/sparc64 bootstrap loader, revision 1.0
> >> (root_(_at_)_s-dallas_(_dot_)_cse_(_dot_)_buffalo_(_dot_)_edu, wed nov 2 09:45:36 UTC 2005)
> >> bootpath="/pci_(_at_)_1f,4000/scsi_(_at_)_3/disk_(_at_)_6,0:a"
> >> loading /boot/defaults/loader.conf
> >> /boot/kernel/kernel data=0x456608+0x5bfa8 syms=[0x8+0x60bd0+0x8+0x511b9]
> >> /
> >> hit [enter] to boot inmediately, or any key for command prompt.
> >> booting [/boot/kernel/kernel]...
> >> nothing to autoload yet.
> >> jumping to kernel entry at 0xc0048000
> >>
> >> And that is all the system never pass from jumping to kernel entry at
> >> 0xc0048000
> >>
> >> Is this an issue?
> >> Is this a bug?
> >>
> >> What should I do for solve this problem and install freebsd 6.0 in this
> >> machine?
> >>
> >
> >You're probably trying to use a not yet supported graphics card.
> >Either plug in a supported one, for the E220R you're only choices
> >so far probably are Sun PGX (aka Sun PGX8) and Sun PGX64 as AFAIK
> >the chassis doesn't allow to use the UPA slots, or use the serial
> >console instead.
>
> Thank you Marius, in fact my graphic card is a raptor fx one. I have tried to use  the serial console but i can not connect it.
>
> And the source box is another 220R box with solaris 8 and work fine because I use it to connect to other server via serial console.
>
> For example I dont have problems to connect to a netra and sunfire boxs consoles
>
> When I try to connect to this 220R nothing happens.
>
> So, I beleave that 220R´s console dont work. but i dont know how to test it in OBP. Can somebody tell me how to tets it? and solve this problem?
>
> Thanks in advance  :)
>
> Mario
>
>
>
> _______________________________________________
> freebsd-sparc64_(_at_)_freebsd_(_dot_)_org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64
> To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe_(_at_)_freebsd_(_dot_)_org"
>


--
James Tanis
jtanis_(_at_)_pycoder_(_dot_)_org
http://pycoder.org
_______________________________________________
freebsd-sparc64_(_at_)_freebsd_(_dot_)_org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-sparc64
To unsubscribe, send any mail to "freebsd-sparc64-unsubscribe_(_at_)_freebsd_(_dot_)_org"


Visit your host, monkey.org