[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Diagnosing fan problem
- To: Tore Lund <toreld_(_at_)_netscape_(_dot_)_net>
- Subject: Re: Diagnosing fan problem
- From: Jesse Sheidlower <jester_(_at_)_panix_(_dot_)_com>
- Date: Fri, 16 Feb 2007 10:11:05 -0500
- Cc: freebsd-questions_(_at_)_freebsd_(_dot_)_org
On Thu, Feb 15, 2007 at 09:24:04PM +0100, Tore Lund wrote:
> Jesse Sheidlower wrote:
> > I have a ThinkPad T41p that has had a variety of fan problems
> > for some time. After my most recent repair things seemed to be
> > working fine, but the other day I was compiling some ports and
> > the machine just shut down in the middle; after some
> > experimentation it seemed clear that it was just overheating
> > under load and shutting itself off. (Looking at the
> > temperature sysctl showed that it was getting increasingly hot
> > until it crashed.)
> > How can I monitor what is happening? Are there any ways I can
> > find out from FreeBSD if the fan is even on, or how it thinks
> > it is working? "systcl -a | grep fan" didn't return anything.
> There are quite a few programs that can tell you CPU temperature and fan
> speed, like mbmon and conky, both in /usr/ports/sysutils. You could
> compare these parameters against data for the fan and cooler in order to
> ascertain whether anything is wrong with the fan.
Unfortunately these don't work, or rather they don't report the
fan speed. (In conky, for example, if I add lines to the config file
to report the CPU temp, fan speed, and fan state, I only get the
CPU temp, with the other lines empty.)
> > Can I control the fan?
> I don't know. In any case, I would not try to control fan speed if the
> problem is that the fan is insufficient or out of order.
Right; my intention wasn't to control the fan manually for
regular use, but rather to try to turn the fan on high so that
I can see if there is, in fact, a whooshing sound that would
indicate the fan has been turned on high.
I'm running FreeBSD 5.4-STABLE, by the way; I acknowledge that
there is the acpi_ibm.ko thing under 6.x, and perhaps this would
be helpful. However I can't even think about upgrading because
compiling almost anything causes the computer to crash from
freebsd-questions_(_at_)_freebsd_(_dot_)_org mailing list
To unsubscribe, send any mail to "freebsd-questions-unsubscribe_(_at_)_freebsd_(_dot_)_org"