[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

bktr not picking up STB brooktree card

Hello all, I'm working to get this STB board working under freebsd.
It appears to be the common one, it is 878 based.

It should use the standard bktr driver. I am running 4.10.

I have added the following to my kernel conf, recompiled, boots fine:

device          bktr
device          iicbus
device          iicbb
device          smbus

dmesg output shows these two:
pci0: <unknown card> (vendor=0x109e, dev=0x036c) at 14.0
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 14.1

pciconf -l -v shows this:

none0_(_at_)_pci0:14:0:        class=0x040000 card=0x264510b4 chip=0x036c109e
rev=0x02 hdr=0x00
    vendor   = 'Brooktree Corporation'
    device   = 'Bt879(??) Video Capture'
    class    = multimedia
    subclass = video

none1_(_at_)_pci0:14:1:        class=0x048000 card=0x264510b4 chip=0x0878109e
rev=0x02 hdr=0x00
    vendor   = 'Brooktree Corporation'
    device   = 'Bt878/Fusion878A Video Capture (Audio Section)'
    class    = multimedia

I've tried forcing the kernel "options         BKTR_OVERRIDE_CARD=3" as
well as a 0 (3 = STB, 0 = generic/unknown) with no luck.

Any thoughts or solutions? I googled around but most references are to a
point after the card is working, mainly framerate issues.

All suggestions welcome! I'm pretty much dead in the water.

                               // Ethan O'Toole
                               // http://users.757.org/~ethan

Visit your host, monkey.org