[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Error when trying to use BKTR



Is there a reason you are not using the modules?

Update /boot/loader.conf to include the following.

bktr_mem_load="YES"
bktr_load="YES"

-=Bill

Ulrik F. Thyve wrote:

>I have a hauppauge wintv pci card. I get this error when i try to load it:
>I have acpi disabled, pnp-OS in bios disabled. I have tried to move the
>card around in different pci-slots, but it doesen't seem to work.
>
>any ideas?
>
>bktr0: <BrookTree 878> mem 0xe7ef6000-0xe7ef6fff irq 7 at device 9.0 on pci2
>bktr0: could not map memory
>device_probe_and_attach: bktr0 attach returned 6
>pci2: <multimedia> at device 9.1 (no driver attached)
>
>
>my kernel config:
>
>
>#tv stash
>device bktr
>device iicbus
>device iicbb
>device smbus
>options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PA
>
>
>the entire dmesg:
>
>
>
>
>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>	The Regents of the University of California. All rights reserved.
>FreeBSD 5.1-RELEASE #4: Tue Dec  9 23:00:13 CET 2003
>    thul_(_at_)_masada:/usr/obj/usr/src/sys/CMFGATE
>Preloaded elf kernel "/boot/kernel/kernel" at 0xc0713000.
>Timecounter "i8254"  frequency 1193182 Hz
>Timecounter "TSC"  frequency 2639766140 Hz
>CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz (2639.77-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Hyperthreading: 2 logical CPUs
>real memory  = 1072889856 (1023 MB)
>avail memory = 1034756096 (986 MB)
>Pentium Pro MTRR support enabled
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcibios: BIOS version 2.10
>Using $PIR table, 14 entries at 0xc00f5420
>pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
>pci0: <PCI bus> on pcib0
>agp0: <Intel Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at
>device 0.0 on pci0
>pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
>pci1: <PCI bus> on pcib1
>pci1: <display, VGA> at device 0.0 (no driver attached)
>pci1: <display> at device 0.1 (no driver attached)
>uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq
>10 at device 29.0 on pci0
>usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
>usb0: USB revision 1.0
>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 2 ports with 2 removable, self powered
>ums0: Logitech USB Mouse, rev 1.10/6.10, addr 2, iclass 3/1
>ums0: 4 buttons and Z dir.
>ugen0: Creative product 0x400c, rev 1.10/0.02, addr 3
>uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq
>3 at device 29.1 on pci0
>usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
>usb1: USB revision 1.0
>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 2 ports with 2 removable, self powered
>uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq
>5 at device 29.2 on pci0
>usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
>usb2: USB revision 1.0
>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub2: 2 ports with 2 removable, self powered
>uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq
>10 at device 29.3 on pci0
>usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
>usb3: USB revision 1.0
>uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub3: 2 ports with 2 removable, self powered
>pci0: <serial bus, USB> at device 29.7 (no driver attached)
>pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
>pci2: <PCI bus> on pcib2
>bktr0: <BrookTree 878> mem 0xe7ef6000-0xe7ef6fff irq 7 at device 9.0 on pci2
>bktr0: could not map memory
>device_probe_and_attach: bktr0 attach returned 6
>pci2: <multimedia> at device 9.1 (no driver attached)
>pcm0: <Creative EMU10K1> port 0xdf80-0xdf9f irq 11 at device 11.0 on pci2
>pcm0: <SigmaTel STAC9721/23 AC97 Codec>
>xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem
>0xfeaffc00-0xfeaffc7f irq 7 at device 13.0 on pci2
>xl0: Ethernet address: 00:04:75:d1:a3:ef
>miibus0: <MII bus> on xl0
>ukphy0: <Generic IEEE 802.3u media interface> on miibus0
>ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>isa0: <ISA bus> on isab0
>atapci0: <Intel ICH5 UDMA100 controller> port
>0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
>orm0: <Option ROM> at iomem 0xc0000-0xccfff on isa0
>pmtimer0 on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
>atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>kbd0 at atkbd0
>fdc0: ready for input in output
>fdc0: cmd 3 failed at out byte 1 of 3
>ppc0: parallel port not found.
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0: configured irq 4 not in bitmap of probed irqs 0
>sio0: port may not be enabled
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 8250 or not responding
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>unknown: <PNP0303> can't assign resources (port)
>Timecounters tick every 10.000 msec
>ad0: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata0-master PIO4
>ad1: 43979MB <IBM-DTLA-307045> [89355/16/63] at ata0-slave PIO4
>acd0: CD-RW <AOPEN CD-RW CRW5224 1.05 20021212> at ata1-master PIO4
>acd1: DVD-ROM <AOpen 12xDVD-ROM DRIVE 10042000> at ata1-slave PIO4
>Mounting root from ufs:/dev/ad0s1a
>WARNING: / was not properly dismounted
>WARNING: /tmp was not properly dismounted
>WARNING: /usr was not properly dismounted
>WARNING: /var was not properly dismounted
>drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem
>0xfe9f0000-0xfe9fffff,0xe8000000-0xebffffff irq 10 at device 0.0 on pci1
>info: [drm] AGP at 0xf4000000 64MB
>info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
>bktr0: <BrookTree 878> mem 0xe7ef6000-0xe7ef6fff irq 7 at device 9.0 on pci2
>bktr0: could not map memory
>device_probe_and_attach: bktr0 attach returned 6
>info: [drm] Loading R200 Microcode
>
>
>
>
>_______________________________________________
>freebsd-multimedia_(_at_)_freebsd_(_dot_)_org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
>To unsubscribe, send any mail to "freebsd-multimedia-unsubscribe_(_at_)_freebsd_(_dot_)_org"
>  
>


Visit your host, monkey.org