[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
new I4B driver v.1.5.2
- Subject: new I4B driver v.1.5.2
- From: hselasky at c2i.net (Hans Petter Selasky)
- Date: Thu Aug 26 08:44:34 2004
There is a new version (1.5.2) of I4B available from:
It should compile with FreeBSD-5-current and older versions of FreeBSD-5.
USB-ISDN support has been disabled until a new USB interface is in place.
But you can get USB-ISDN devices working using version 1.5.0 with
FreeBSD-5.1 or FreeBSD-5.2, but not FreeBSD-5-current.
Some plans for the future:
- support for more than 3*2 channels
- support for VoIP
I suggest that we do a job getting the ISDN-hardware that is not
supported by this I4B release, but is supported by FreeBSD-5-current,
into the new Layer1 and Layer4, and then get it committed to
I have now been using this driver for some months and I have seen very few
bugs. I have seen no bugs in Layer1, Layer2, Layer3, Layer4 and isdnd which
currently unresolved bug: ppp can go into a loop dialing out and hanging up,
if the "down" command has been used, but usually recovers after a few dials.
Hence ppp does not get any signals back from /dev/i4brbc about the dial-state,
that should be a bug in ppp?
Visit your host, monkey.org