[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

fxp device timeout



Hello all,

I have already posted this message to freebsd-stable, but there was no reply
up to now.



I have a 2*PentiumPro200 PC with FreeBSD 5.3 acting as a firewall in a
department network. 
The PC has both IDE and SCSI hard drives.
(Quite strange system for a firewall, isn't it? However, it was the most
suitable box I was able to find).

It has 3 NICs xl0,fxp0 and fxp1. 
>From time to time both fxp's SIMULTANEOUSLY stop working and produce
messages fxp*: device timeout. 

After doing ifconfig fxp* down&up it said 
Dec 22 19:22:13 firewall kernel: fxp1: SCB timeout: 0x70 0x0 0x50 0x0 
Dec 22 19:22:13 firewall kernel: fxp1: SCB timeout: 0x20 0x0 0x50 0x0 
Dec 22 19:22:23 firewall last message repeated 53 times 
Dec 22 19:22:23 firewall kernel: fxp0: SCB timeout: 0x70 0x0 0x50 0x0 
Dec 22 19:22:23 firewall kernel: fxp1: SCB timeout: 0x20 0x0 0x50 0x0

The system resumes normal operation only after reboot.

xl0 does not experience any problems.

Does anybody know how to avoid this?



Many thanks in advance.



Here is the output of pciconf -l -v
********************************************
isab0_(_at_)_pci0:0:0: class=0x000000 card=0x00000000 chip=0x04848086 rev=0x88
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82378ZB/IB,82379AB PCI to ISA Bridge, System I/O'
    class    = old
    subclass = non-VGA display device
atapci0_(_at_)_pci0:1:0:       class=0x01018a card=0x00000000 chip=0x06461095
rev=0x01 hdr=0x00
    vendor   = 'Silicon Image Inc (Was: CMD Technology Inc)'
    device   = 'PCI-0646 EIDE Adapter (Single FIFO)'
    class    = mass storage
    subclass = ATA
ahc0_(_at_)_pci0:2:0:  class=0x010000 card=0x00000000 chip=0x80789004 rev=0x00
hdr=0x00
    vendor   = 'Adaptec Inc'
    device   = 'AIC-7880P Ultra/Ultra Wide SCSI Chipset'
    class    = mass storage
    subclass = SCSI
none0_(_at_)_pci0:11:0:        class=0x030000 card=0x00000000 chip=0x0519102b
rev=0x01 hdr=0x00
    vendor   = 'Matrox Electronic Systems Ltd.'
    device   = 'MGA-2064W Storm (Millennium board)'
    class    = display
    subclass = VGA
xl0_(_at_)_pci0:12:0:  class=0x020000 card=0x100010b7 chip=0x920010b7 rev=0x6c
hdr=0x00
    vendor   = '3COM Corp, Networking Division'
    device   = '3C905C-TX Fast EtherLink for PC Management NIC'
    class    = network
    subclass = ethernet
fxp0_(_at_)_pci0:13:0: class=0x020000 card=0x1200103c chip=0x12298086 rev=0x02
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
    class    = network
    subclass = ethernet
fxp1_(_at_)_pci0:14:0: class=0x020000 card=0x1200103c chip=0x12298086 rev=0x02
hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
    class    = network
    subclass = ethernet
none1_(_at_)_pci0:20:0:        class=0x050000 card=0x00000000 chip=0x84c58086
rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82453KX/GX 450KX/GX Memory Controller (Orion)'
    class    = memory
    subclass = RAM
hostb0_(_at_)_pci0:25:0:       class=0x060000 card=0x00000000 chip=0x84c48086
rev=0x04 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82454KX/GX 450KX/GX Orion System Controller'
    class    = bridge
    subclass = HOST-PCI
*****************************************************
Here is the output of dmesg -a:
******************************************************
FreeBSD 5.3-RELEASE #0: Sat Dec 18 11:45:40 MSK 2004
    bugman_(_at_)_firewall_(_dot_)_xj_(_dot_)_dcn:/usr/src/sys/i386/compile/FIREWALL
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium Pro (199.74-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x619  Stepping = 9
 
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMO
V>
real memory  = 100663296 (96 MB)
avail memory = 88842240 (84 MB)
MPTable: <HP       XX          >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs  cpu0 (BSP): APIC ID:  1
 cpu1 (AP): APIC ID:  0
ioapic0: Changing APIC ID to 16
ioapic0: Assuming intbase of 0
MPTable: Ignoring global interrupt entry for pin 1
MPTable: Ignoring global interrupt entry for pin 2
MPTable: Ignoring global interrupt entry for pin 3
MPTable: Ignoring global interrupt entry for pin 4
MPTable: Ignoring global interrupt entry for pin 5
MPTable: Ignoring global interrupt entry for pin 6
MPTable: Ignoring global interrupt entry for pin 7
MPTable: Ignoring global interrupt entry for pin 8
MPTable: Ignoring global interrupt entry for pin 9
MPTable: Ignoring global interrupt entry for pin 10
MPTable: Ignoring global interrupt entry for pin 11
MPTable: Ignoring global interrupt entry for pin 12
MPTable: Ignoring global interrupt entry for pin 13
MPTable: Ignoring global interrupt entry for pin 14
MPTable: Ignoring global interrupt entry for pin 15 ioapic0 <Version 1.1>
irqs 0-15 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454KX/GX (Orion) host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 0.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <CMD 646 WDMA2 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 14 at device 1.0 on
pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ahc0: <Adaptec aic7880 Ultra SCSI adapter> port 0xf800-0xf8ff mem
0xffbfc000-0xffbfcfff irq 9 at device 2.0 on pci0
ahc0: Using left over BIOS settings
ahc0: [GIANT-LOCKED]
aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
pci0: <display, VGA> at device 11.0 (no driver attached)
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xf400-0xf47f mem
0xffbec000-0xffbec07f irq 10 at device 12.0 on pci0
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:50:da:39:91:99
fxp0: <Intel 82557 Pro/100 Ethernet> port 0xf000-0xf01f mem
0xffa00000-0xffafffff,0xffbdc000-0xffbdcfff irq 11 at device 13.0 on pci0
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:60:b0:67:21:6f
fxp1: <Intel 82557 Pro/100 Ethernet> port 0xec00-0xec1f mem
0xff900000-0xff9fffff,0xffbcc000-0xffbccfff irq 11 at device 14.0 on pci0
miibus2: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus2
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:60:b0:67:31:ec
pci0: <memory, RAM> at device 20.0 (no driver attached) cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem 0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4
flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port) Timecounters tick every
10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default
to deny, logging limited to 100 packets/entry by default
ad2: 2441MB <WDC AC22500L/24.39E26> [4960/16/63] at ata1-master WDMA2
acd0: CDROM <HITACHI CDR-7930/1023> at ata1-slave PIO3 Waiting 15 seconds
for SCSI devices to settle da0 at ahc0 bus 0 target 0 lun 0
da0: <HP 2.13GB B 50-0658 0658> Fixed Direct Access SCSI-2 device
da0: 3.300MB/s transfers, Tagged Queueing Enabled
da0: 2033MB (4165272 512 byte sectors: 64H 32S/T 2033C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <HP 2.13GB B 50-0658 0658> Fixed Direct Access SCSI-2 device
da1: 3.300MB/s transfers, Tagged Queueing Enabled
da1: 2033MB (4165272 512 byte sectors: 64H 32S/T 2033C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <HP 2.13GB B 50-0658 0658> Fixed Direct Access SCSI-2 device
da2: 3.300MB/s transfers, Tagged Queueing Enabled
da2: 2033MB (4165272 512 byte sectors: 64H 32S/T 2033C)
da3 at ahc0 bus 0 target 3 lun 0
da3: <HP 2.13GB B 50-0658 0658> Fixed Direct Access SCSI-2 device
da3: 3.300MB/s transfers, Tagged Queueing Enabled
da3: 2033MB (4165272 512 byte sectors: 64H 32S/T 2033C)
da4 at ahc0 bus 0 target 4 lun 0
da4: <HP 2.13GB B 50-0658 0658> Fixed Direct Access SCSI-2 device
da4: 3.300MB/s transfers, Tagged Queueing Enabled
da4: 2033MB (4165272 512 byte sectors: 64H 32S/T 2033C)
da5 at ahc0 bus 0 target 5 lun 0
da5: <HP 2.13GB B 50-0658 0658> Fixed Direct Access SCSI-2 device
da5: 3.300MB/s transfers, Tagged Queueing Enabled
da5: 2033MB (4165272 512 byte sectors: 64H 32S/T 2033C)
da6 at ahc0 bus 0 target 6 lun 0
da6: <HP 2.13GB B 50-0658 0658> Fixed Direct Access SCSI-2 device
da6: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da6: 2033MB (4165272 512 byte sectors: 64H 32S/T 2033C)
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad2s1a
Pre-seeding PRNG:
 kickstart
.
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad2s1b as swap device Starting file system checks:
/dev/ad2s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad2s1a: clean, 81944 free (1528 frags, 10052 blocks, 1.2%
fragmentation)
/dev/ad2s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad2s1e: clean, 126835 free (35 frags, 15850 blocks, 0.0% fragmentation)
/dev/da6s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/da6s1d: clean, 1005324 free (28 frags, 125662 blocks, 0.0%
fragmentation)
/dev/ad2s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad2s1f: clean, 369161 free (1201 frags, 45995 blocks, 0.2%
fragmentation)
/dev/ad2s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad2s1d: clean, 122503 free (87 frags, 15302 blocks, 0.1% fragmentation)
Setting hostname: firewall.xj.dcn.
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=9<RXCSUM,VLAN_MTU>
        inet 10.0.103.3 netmask 0xffffff00 broadcast 10.0.103.255
        inet xxx.xxx.xxx.xxx netmask 0xfffffff0 broadcast xxx.xxx.xxx.xxx
        ether 00:50:da:39:91:99
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet xxx.xxx.xxx.xxx netmask 0xffffffc0 broadcast xxx.xxx.xxx.xxx
        ether 00:60:b0:67:21:6f
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=8<VLAN_MTU>
        inet xxx.xxx.xxx.xxx netmask 0xfffffffc broadcast xxx.xxx.xxx.xxx
        ether 00:60:b0:67:31:ec
        media: Ethernet autoselect (10baseT/UTP)
        status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
***********************************************************
Here is my kernel configuration
***********************************************************

machine         i386
#cpu            I486_CPU
#cpu            I586_CPU
cpu             I686_CPU
ident           FIREWALL

#custom options by P. Trifonov
options         SMP
options         IPFIREWALL
options         CPU_DISABLE_SSE
options         IPDIVERT                #divert sockets
options         TCP_DROP_SYNFIN         # drop TCP packets with SYN+FIN
options         IPFIREWALL_VERBOSE   # print information about dropped
packets
options         IPFIREWALL_VERBOSE_LIMIT=100    # limit verbosity


# To statically compile in device wiring instead of /boot/device.hints
#hints          "GENERIC.hints"         # Default places to look for
devices.

options         SCHED_4BSD              # 4BSD scheduler
#options         SCHED_ULE              # Trifonov: use SMP scheduler
options         INET                    # InterNETworking
#options        INET6                   # IPv6 communications protocols
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big
directories
options         MD_ROOT                 # MD is a potential root device
#options        NFSCLIENT               # Network Filesystem Client
#options        NFSSERVER               # Network Filesystem Server
#options        NFS_ROOT                # NFS usable as /, requires
NFSCLIENT
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires
PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_GPT                # GUID Partition Tables.
options         COMPAT_43               # Compatible with BSD 4.3 [KEEP
THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         SCSI_DELAY=15000        # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options         AHC_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~128k to driver.
options         AHD_REG_PRETTY_PRINT    # Print register bitfields in debug
                                        # output.  Adds ~215k to driver.
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.

device          apic            # I/O APIC

# Bus support.  Do not remove isa, even if you have no isa slots
device          isa
device          eisa
device          pci

# Floppy drives
device          fdc

# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapifd         # ATAPI floppy drives
device          atapist         # ATAPI tape drives
options         ATA_STATIC_ID   # Static device numbering

# SCSI Controllers
device          ahb             # EISA AHA1742 family
device          ahc             # AHA2940 and onboard AIC7xxx devices
device          ahd             # AHA39320/29320 and onboard AIC79xx devices
device          amd             # AMD 53C974 (Tekram DC-390(T))
device          isp             # Qlogic family
device          mpt             # LSI-Logic MPT-Fusion
#device         ncr             # NCR/Symbios Logic
device          sym             # NCR/Symbios Logic (newer chipsets + those
of `ncr')
device          trm             # Tekram DC395U/UW/F DC315U adapters

device          adv             # Advansys SCSI adapters
device          adw             # Advansys wide SCSI adapters
device          aha             # Adaptec 154x SCSI adapters
device          aic             # Adaptec 15[012]x SCSI adapters,
AIC-6[23]60.
device          bt              # Buslogic/Mylex MultiMaster SCSI adapters

device          ncv             # NCR 53C500
device          nsp             # Workbit Ninja SCSI-3
device          stg             # TMC 18C30/18C50

# SCSI peripherals
device          scbus           # SCSI bus (required for SCSI)
device          ch              # SCSI media changers
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
device          ses             # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
device          amr             # AMI MegaRAID
device          asr             # DPT SmartRAID V, VI and Adaptec SCSI RAID
device          ciss            # Compaq Smart RAID 5*
device          dpt             # DPT Smartcache III, IV - See NOTES for
options
device          hptmv           # Highpoint RocketRAID 182x
device          iir             # Intel Integrated RAID
device          ips             # IBM (Adaptec) ServeRAID
device          mly             # Mylex AcceleRAID/eXtremeRAID
device          twa             # 3ware 9000 series PATA/SATA RAID

# RAID controllers
device          aac             # Adaptec FSA RAID
device          aacp            # SCSI passthrough for aac (requires CAM)
device          ida             # Compaq Smart RAID
device          mlx             # Mylex DAC960 family
device          pst             # Promise Supertrak SX6000
device          twe             # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device          psm             # PS/2 mouse

device          vga             # VGA video card driver

device          splash          # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device          sc

# Enable this for the pcvt (VT220 compatible) console driver
#device         vt
#options        XSERVER         # support for X server on a vt console
#options        FAT_CURSOR      # start with block cursor

device          agp             # support several AGP chipsets

# Floating point support - do not disable.
device          npx

# Power management support (see NOTES for more options)
#device         apm
# Add suspend/resume support for the i8254.
device          pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device          cbb             # cardbus (yenta) bridge
device          pccard          # PC Card (16-bit) bus
device          cardbus         # CardBus (32-bit) bus

# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports

# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          plip            # TCP/IP over parallel
device          ppi             # Parallel port interface device
#device         vpo             # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is # supported by
the puc(4) glue driver, uncomment the following # line to enable it
(connects to the sio and/or ppc drivers):
#device         puc

# PCI Ethernet NICs.
device          de              # DEC/Intel DC21x4x (``Tulip'')
device          em              # Intel PRO/1000 adapter Gigabit Ethernet
Card
device          ixgb            # Intel PRO/10GbE Ethernet Card
device          txp             # 3Com 3cR990 (``Typhoon'')
device          vx              # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
device          bfe             # Broadcom BCM440x 10/100 Ethernet
device          bge             # Broadcom BCM570xx Gigabit Ethernet
device          dc              # DEC/Intel 21143 and various workalikes
device          fxp             # Intel EtherExpress PRO/100B (82557, 82558)
device          lge             # Level 1 LXT1001 gigabit ethernet
device          nge             # NatSemi DP83820 gigabit ethernet
device          pcn             # AMD Am79C97x PCI 10/100 (precedence over
'lnc')
device          re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
device          sf              # Adaptec AIC-6915 (``Starfire'')
device          sis             # Silicon Integrated Systems SiS 900/SiS
7016
device          sk              # SysKonnect SK-984x & SK-982x gigabit
Ethernet
device          ste             # Sundance ST201 (D-Link DFE-550TX)
device          ti              # Alteon Networks Tigon I/II gigabit
Ethernet
device          tl              # Texas Instruments ThunderLAN
device          tx              # SMC EtherPower II (83c170 ``EPIC'')
device          vge             # VIA VT612x gigabit ethernet
device          vr              # VIA Rhine, Rhine II
device          wb              # Winbond W89C840F
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs.  pccard NICs included.
device          cs              # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device          ed              # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device          ex              # Intel EtherExpress Pro/10 and Pro/10+
device          ep              # Etherlink III based cards
device          fe              # Fujitsu MB8696x based cards
device          ie              # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device          lnc             # NE2100, NE32-VL Lance Ethernet cards
device          sn              # SMC's 9000 series of Ethernet chips
device          xe              # Xircom pccard Ethernet

# ISA devices that use the old ISA shims
#device         le

# Wireless NIC cards
#device         wlan            # 802.11 support
#device         an              # Aironet 4500/4800 802.11 wireless NICs.
#device         awi             # BayStack 660 and others
#device         wi              # WaveLAN/Intersil/Symbol 802.11 wireless
NICs.
#device         wl              # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device          loop            # Network loopback
device          mem             # Memory and kernel memory devices
device          io              # I/O device
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          faith           # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device          bpf             # Berkeley packet filter

# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          urio            # Diamond Rio 500 MP3 player
device          uscanner        # Scanners
# USB Ethernet, requires mii
device          aue             # ADMtek USB Ethernet
device          axe             # ASIX Electronics USB Ethernet
device          cue             # CATC USB Ethernet
device          kue             # Kawasaki LSI USB Ethernet
device          rue             # RealTek RTL8150 USB Ethernet

# FireWire support
device          firewire        # FireWire bus code
device          sbp             # SCSI over FireWire (Requires scbus and da)
device          fwe             # Ethernet over FireWire (non-standard!)
***********************************************************









With best regards,
P. Trifonov 


Visit your host, monkey.org