[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

X not properly installed AMD64 Tyan S2885



On Tue, 9 Nov 2004, misnagid wrote:

> I just did a new unstall of FreeBDS 5.3 RELEASE for AMD64 on a dual Opteron 4
> GB DRAM Tyan S2885.  Unlike other entries here, this new install was not done
> with the RAID 3ware driver.  Nor were the symptoms alike.
> The install went along fine till when the x86congfig was supposed to become
> available and be run during install.  There were no such commands available.
> X does not properly start.

Mine also, although I did a bit more checking, and i can tell you that the
mouse isn't working.  I tried the mouse separate from X11, and it still
doesn't work (I can't get a mouse cursor from moused).  I was thining it
was something speicifc from my usb mouse; i tried both ums0 and sysmouse,
protocol Auto, no luck.  My system is on net, and from anyone know on
FreeBSD, i would be happy to allow net access for playing around with.
it;s a new install, so you can risk a panic without worrying that I'll
freak out on you.  I don't have another riskable FreeBSD system to play
with at the moment.

>
> Please assist.
> Jerry
>
> /var/log/kdm.log:
> ********************************************************************************
> Note that your system uses syslog. All of kdm's internally generated messages
> (i.e., not from libraries and external programs/scripts it uses) go to the
> daemon.* syslog facility; check your syslog configuration to find out to
> which
> file(s) it is logged. PAM logs messages related to authentication to
> authpriv.*.
> ********************************************************************************
>
>
> Release Date: 18 December 2003
> X Protocol Version 11, Revision 0, Release 6.7
> Build Operating System: FreeBSD 5.3 amd64 [ELF]
> Current Operating System: FreeBSD chassid.sothfd01.mi.comcast.net 5.3-RELEASE
> FreeBSD 5.3-RELEASE #0: Fri Nov  5 03:50:01 UTC 2004
> root_(_at_)_fanboy_(_dot_)_samsco_(_dot_)_home:/usr/obj/usr/src/sys/GENERIC amd64
> Build Date: 13 October 2004
> 	Before reporting problems, check http://wiki.X.Org
> 	to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  8 23:51:40 2004
> (EE) Unable to locate/open config file
> xf86AutoConfig: Primary PCI is 5:0:0
> Running "/usr/X11R6/bin/getconfig -X 60700000 -I
> /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig
> -v 0x10de -d 0x0331 -r 0xa1 -s 0x10b0 -b 0x0407 -c 0x0300"
> getconfig.pl: Version 1.0.
> getconfig.pl: Xorg Version: 6.7.0.0.
> getconfig.pl: 23 built-in rules.
> getconfig.pl: file '/usr/X11R6/lib/X11/getconfig/xorg.cfg' has bad signature.
> getconfig.pl: no rules in file '/usr/X11R6/lib/X11/getconfig/xorg.cfg'.
> getconfig.pl: Evaluated 23 rules with 0 errors.
> getconfig.pl: Weight of result is 500.
> New driver is "nv"
> (==) Using default built-in configuration (53 lines)
> (EE) Failed to load module "fbdev" (module does not exist, 0)
>
> Release Date: 18 December 2003
> X Protocol Version 11, Revision 0, Release 6.7
> Build Operating System: FreeBSD 5.3 amd64 [ELF]
> Current Operating System: FreeBSD chassid.sothfd01.mi.comcast.net 5.3-RELEASE
> FreeBSD 5.3-RELEASE #0: Fri Nov  5 03:50:01 UTC 2004
> root_(_at_)_fanboy_(_dot_)_samsco_(_dot_)_home:/usr/obj/usr/src/sys/GENERIC amd64
> Build Date: 13 October 2004
> 	Before reporting problems, check http://wiki.X.Org
> 	to make sure that you have the latest version.
> Module Loader present
> Markers: (--) probed, (**) from config file, (==) default setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov  9 00:38:08 2004
> (EE) Unable to locate/open config file
> xf86AutoConfig: Primary PCI is 5:0:0
> Running "/usr/X11R6/bin/getconfig -X 60700000 -I
> /etc/X11,/usr/X11R6/etc/X11,/usr/X11R6/lib/modules,/usr/X11R6/lib/X11/getconfig
> -v 0x10de -d 0x0331 -r 0xa1 -s 0x10b0 -b 0x0407 -c 0x0300"
> getconfig.pl: Version 1.0.
> getconfig.pl: Xorg Version: 6.7.0.0.
> getconfig.pl: 23 built-in rules.
> getconfig.pl: file '/usr/X11R6/lib/X11/getconfig/xorg.cfg' has bad signature.
> getconfig.pl: no rules in file '/usr/X11R6/lib/X11/getconfig/xorg.cfg'.
> getconfig.pl: Evaluated 23 rules with 0 errors.
> getconfig.pl: Weight of result is 500.
> New driver is "nv"
> (==) Using default built-in configuration (53 lines)
> (EE) Failed to load module "fbdev" (module does not exist, 0)
>
>
> _______________________________________________
> freebsd-amd64_(_at_)_freebsd_(_dot_)_org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-amd64
> To unsubscribe, send any mail to "freebsd-amd64-unsubscribe_(_at_)_freebsd_(_dot_)_org"
>
>

----------------------------------------------------------------------------
Chuck Robey         | Interests include C & Java programming, FreeBSD,
chuckr_(_at_)_chuckr_(_dot_)_org   | electronics, communications, and SF/Fantasy.

New Year's Resolution:  I will not sphroxify gullible people into looking up
fictitious words in the dictionary (on the wall at my old fraternity,
Signa Phi Nothing).
----------------------------------------------------------------------------